How to Read & identify Bearing Number?
Bearing is a material which is used to rotate the equipment in liner movement. Bearing is used to reduce the stress and friction of the machine.
There are many types of bearing in the market some of the most used bearings are ball bearing, roller bearing, cylindrical roller bearing, tapered roller bearings, thrust bearing etc….
Each bearing contains its own dimensions identification… in this tutorial, we are going to see how to identify the bearing number 6206 ZZ 2RS & 6205 ZZ 2RS..
However, the huge size bearing can be removed with the help of a Single Acting Hollow Ram Hydraulic Jack only.
First digit identification of bearing:
The first Number 6 says about the type of bearing, here 6 means it is ball bearing suppose incase if it is 1 means that’s deep grooved ball bearings, 2 means cylindrical roller bearing, 3 means thrust bearings etc here the list of tables for your reference.
|1||Self aligning Ball Bearing|
|2||Spherical ball bearing|
|3||Double row Angular contact Ball Bearing|
|4||Double row ball bearing|
|5||Thrust ball bearing|
|6||Single row deep groove ball bearing|
|7||Single row angular contact|
|8||Felt Seal Bearing|
|32/T||Tappered roller bearing|
|N||Cylinderical roller bearing|
|NN||Double row roller bearing|
|NA||Needle roller bearing|
|BK||Needle roller bearing with closed end|
|HK||Needle roller bearing with open end|
|C||CARB toroidal roller bearing|
|K||Needle roller bearing and cast thrust assembly|
|QJ||Four Point contact ball bearing|
Second digit identification of bearing:
The second digit says about the toughness of the bearing, here 2 mentions that the bearing can be used for light duty applications.
|1||Extra light thrust|
|5||Extra thin section|
|6||Very thin section|
The third and fourth digit identification of bearing:
The third and fourth digit tells about the inner diameter of the bearing. i.e here 06 mentions the bearing inner diameter is 30mm and 05 mentions the inner diameter is 25mm such that.
|*04||20 mm (4 x 5 mm)|
|*05||25 mm (5 x 5 mm)|
|*06||30 mm (6 x 5 mm)|
|above||above => multiplication of 5mm|
|* In case there is no fourth digit, then the 3rd digit indicates the bore size in mm. For example: in case of bearing 636, the bore size of the bearing will be 6mm|
The bearings last Letter identification:
Last digit says about the type of enclose used.
|Z||single side shieled|
|ZZ||double side both side shielded|
|RS||one side rubber sealed|
|2RS||double side rubber sealed|
|V||one side non contact seal|
|VV||both side non contact seals|
|DDU||both side contact seals|
|NR||snap ring and groove|
|C3||the clearance factor|