What is Motor? How Motor Works With Graphical Presentation

Motor:

Motor is a device which convert electrical energy into mechanical energy. This mechanical energy then can be supplied to various types of loads such as pumps, fans etc. The motors can operate on DC power supply as well as AC. power supply. The motor is operating on DC. Supply such a motor is called DC motors while the motor is operating on AC supply such are called AC. motors.

AC supply is commonly available for all domestic applications that’s why AC motors are very popularly used in practice. The AC motors are classified as single and three phase induction motors, synchronous motors and some special type of motors such as stepper motor, reluctance motor etc. Out of these types, three phase induction motors are widely used for various industrial applications.

Principle:

The motors works under principle of Faraday’s law of electromagnetic induction. The law stats that, the current carrying conductor is kept in magnetic field which experience force. The direction of force can be found through Fleming left hand rule.

Learn More:   What is Through Fault
What is Motor? How Motor Works With Graphical Presentation
Credits Goes: Abnormaal

Three Phase Induction Motor:

The important advantages of three phase induction motors are self-starting property, no need of starting device, higher power factor, good type speed regulation and robust construction. The working principle of three phase induction motors is based on the production of rotating magnetic field.
[wp_ad_camp_1]

Rotating magnetic field:

The rotating magnetic field can be defined as the field or flux having constant amplitude but whose axis is continuously rotating in a plane with the certain speed. So if the arrangement is made to rotate a permanent magnet, then the resulting field is a rotating magnetic field. But in this method, it is necessary to rotate a magnet physically to produce rotating magnetic field.

But in three phase induction motors such a rotating field is produced by supplying currents to a stationery winding, with the help of three phase AC supply. The current carrying windings produce the magnetic field or flux. And due to interaction of three fluxes produced due to three phase supply, resultant flux has a constant magnitude and its axis rotating in space, without physically rotating the windings. This type of field is called rotating magnetic field.

Learn More:   7 Purpose of NGR Neutral Grounding Resistor Transformer & Generator

Single Phase Motor:

In general purpose in shops, offices, schools etc. single phase AC supply is commonly used, therefore in that place we cannot use DC motor. So that, the motors which work on single phase AC supply are very Popularly in use. These AC motors are called single phase AC motors. But the power rating of such motors is very small. Some of them are even fractional power typically less than 100 Watts example Fans, single phase dewatering pump etc.

Types of Single phase motor:

  • Split phase induction motor
  • Capacitor start induction motor
  • Capacitor run induction motor
  • Shaded pole induction motor

 

DC machines:

A DC motor in simple words is a device that converts electrical energy (direct current system) into mechanical energy. DC motors are reversible; you can use them motor as well as generator. It consists of armature circuit, field circuit and Commutation circuit.

What is Motor? How Motor Works With Graphical Presentation
Image Credits: Lookang

[wp_ad_camp_1]
Armature circuit – A winding where the load current is carried, such that can be either stationary or rotating part of motor or generator.

Learn More:   What is Electric Field, Electric Field Intensity, Electric Field Density

Field circuit – A set of windings that produces a magnetic field so that the electromagnetic induction can take place in electric machines.

Commutation: A mechanical technique in which rectification can be achieved, or from which DC can be derived, in DC machines.

There are five types of brushed DC motor:-

  • DC shunt-wound motor
  • DC series-wound motor
  • DC compound motor (two configurations):
    • Cumulative compound
    • Differentially compounded
  • PM DC motor
  • Separately excited

Key points:

 

  • Rotation is independent of the frequency of the AC voltage.
  • Rotation is equal to synchronous speed (motor-stator-field speed).
  • In SCIM, fixed-speed operation rotation is equal to synchronous speed, less slip speed.
  • In non-slip energy-recovery systems, WRIM is usually used for motor-starting but can be used to vary load speed.
  • All the motors are used in Variable-speed operation for many applications.
  • Whereas induction- and synchronous-motor drives are typically with either six-step or sinusoidal-waveform output, BLDC-motor drives are usually with trapezoidal-current waveform; the behavior of both sinusoidal and trapezoidal PM machines is, however, identical in terms of their fundamental aspects.
  • In variable-speed operation, WRIM (Wound-rotor induction motor) is used in slip-energy recovery and double-fed induction-machine applications.
  • A cage winding is a shorted-circuited squirrel-cage rotor, a wound winding is connected externally through slip rings.
  • Mostly single-phase for domestic applications and three-phase for industrial application.
  • DC motors are reversible; you can run as generator as well as motor.
Learn More:   Power Factor Improvement | Reactive Power Compensation Methods

Ref: https://en.wikipedia.org/wiki/Electric_motor

LEAVE A REPLY

Please enter your comment!
Please enter your name here