Active and Passive Components

Active and Passive Components:

The circuit components are classified into two categories such as

  1. Active Components
  2. Passive Components

Active Components:

The circuit component is ability to supply energy to other circuit which components can be called active components. Or ability to inject power to a circuit
[wp_ad_camp_1]
Example: Voltage sources and current sources. Active components include amplifying components such as transistors, triode vacuum tubes (valves), and tunnel diodes.

Integrated circuits

  1. Digital
  2. Analog
  3. Hall effect sensor –senses a magnetic field.
  4. Current sensor – Senses a current through it

Current sources:

  1. Filament lamp (indicator lamp)
  2. Vacuum fluorescent display (VFD) (preformed characters, 7 segment, starburst)
  3. Cathode ray tube (CRT) (dot matrix scan, radial scan (e.g. radar), arbitrary scan (e.g. oscilloscope)) (monochrome & colour)
  4. LCD (preformed characters, dot matrix) (passive, TFT) (monochrome, colour)
  5. Neon (individual, 7 segment display)
  6. LED (individual, 7 segment display, starburst display, dot matrix)
  7. Flap indicator (numeric, preprinted messages)
  8. Plasma display (dot matrix)

Obsolete:

  1. Incandescent filament 7 segment display (aka ‘Numitron’)
  2. Nixie Tube
  3. Dekatron (aka glow transfer tube)
  4. Magic eye tube indicator
  5. Penetron (a 2 colour see-through CRT)
Learn More:   IP Enclosure Ratings & Standards Electrical Equipments

Diodes

Conduct electricity easily in one direction, among more specific behaviors.

  1. Diode, Rectifier, Bridge rectifier
  2. Schottky diode, hot carrier diode – super fast diode with lower forward voltage drop
  3. Zener diode – Passes current in reverse direction to provide a constant voltage reference
  4. Transient voltage suppression diode (TVS), Unipolar or Bipolar – used to absorb high-voltage spikes
  5. Varactor, Tuning diode, Varicap, Variable capacitance diode – A diode whose AC capacitance varies according to the DC voltage applied.
  6. Various examples of Light-emitting diodes
  7. Light-emitting diode (LED) – A diode that emits light
  8. Photodiode – Passes current in proportion to incident light
  9. Avalanche photodiode with internal gain
  10. Solar Cell, photovoltaic cell, PV array or panel, produces power from light
  11. DIAC (Diode for Alternating Current), Trigger Diode, SIDAC) – Often used to trigger an SCR
  12. Constant-current diode
  13. Peltier cooler – A semiconductor heat pump
  14. Tunnel diode – very fast diode based on quantum mechanical tunneling

Sources of electrical power sources:

  1. Battery – acid- or alkali-based power supply
  2. Fuel cell – an electrochemical generator
  3. Power supply – usually a main hook-up
  4. Photo voltaic device – generates electricity from light
  5. Thermo electric generator – generates electricity from temperature gradients
  6. Electrical generator – an electromechanical power source
  7. Piezoelectric generator – generates electricity from mechanical strain
  8. Van de Graaff generator – generates electricity from friction
Learn More:   Electrical Cable lugs Crimping Procedure For Beginner

Transistors

Transistors were considered the invention of the twentieth century that changed electronic circuits forever. A transistor is a semiconductor device used to amplify and switch electronic signals and electrical power.
[wp_ad_camp_1]
See: History of Electrical Engineering

  1. Transistors
  2. Bipolar junction transistor (BJT, or simply “transistor”) – NPN or PNP
  3. Photo transistor – Amplified photodetector
  4. Darlington transistor – NPN or PNP
  5. Photo Darlington – Amplified photodetector
  6. Sziklai pair (Compound transistor, complementary Darlington)
  7. Field-effect transistor (FET)
  8. JFET (Junction Field-Effect Transistor) – N-CHANNEL or P-CHANNEL
  9. MOSFET (Metal Oxide Semiconductor FET) – N-CHANNEL or P-CHANNEL
  10. MESFET (MEtal Semiconductor FET)
  11. HEMT (High electron mobility transistor)
  12. Thyristors
  13. Silicon-controlled rectifier (SCR) – Passes current only after triggered by a sufficient control voltage on its gate
  14. TRIAC (TRIode for Alternating Current) – Bidirectional SCR
  15. Unijunction transistor (UJT)
  16. Programmable Unijunction transistor (PUT)
  17. SIT (Static induction transistor)
  18. SITh (Static induction thyristor)
  19. Composite transistors
  20. IGBT (Insulated-gate bipolar transistor)

Optoelectronic devices

  1. Opto-electronics
  2. Opto-Isolator, Opto-Coupler, Photo-Coupler – Photodiode, BJT, JFET, SCR, TRIAC, Zero-crossing TRIAC, Open collector IC, CMOS IC, Solid state relay (SSR)
  3. Opto switch, Opto interrupter, Optical switch, Optical interrupter, Photo switch, Photo interrupter
  4. LED display – Seven-segment display, Sixteen-segment display, Dot-matrix display
Learn More:   Cable Gland Size Chart & Double Compression Cable Gland Chart

Passive Components:

The circuit components are said to be passive, if it absorbs energy.

Example: Resistor, Inductor and Capacitor.

Resistors

  1. SMD resistors on a backside of a PCB
  2. Pass current in proportion to voltage (Ohm’s law) and oppose current.
  3. Resistor – fixed value
  4. Power resistor – larger to safely dissipate heat generated
  5. SIP or DIP resistor network – array of resistors in one package
  6. Variable resistor
  7. Rheostat – two-terminal variable resistor (often for high power)
  8. Potentiometer – three-terminal variable resistor (variable voltage divider)
  9. Trim pot – Small potentiometer, usually for internal adjustments
  10. Thermistor – thermally sensitive resistor whose prime function is to exhibit a large, predictable and precise change in electrical resistance when subjected to a corresponding change in body temperature.
  11. Humistor – humidity-varied resistor
  12. Photoresistor
  13. Memristor
  14. Varistor, Voltage Dependent Resistor, MOV – Passes current when excessive voltage is present
  15. Resistance wire, Nichrome wire – wire of high-resistance material, often used as a heating element
  16. Heater – heating element
Learn More:   0.5 HP Motor Price, Cable Size Chart, Contactor & Relay Size Chart

Also see: 7 Types of Voltage Level ELV LV MV HV EHV Ultra High Voltage

Capacitors Components:

Capacitors store and release electrical charge. They are used for filtering power supply lines, tuning resonant circuits, and for blocking DC voltages while passing AC signals, among numerous other uses.[wp_ad_camp_1]

  1. Capacitor
  2. Integrated capacitors
  3. MIS capacitor
  4. Trench capacitor
  5. Fixed capacitors
  6. Ceramic capacitor
  7. Film capacitor
  8. Electrolytic capacitor
  9. Aluminum electrolytic capacitor
  10. Tantalum electrolytic capacitor
  11. Niobium electrolytic capacitor
  12. Polymer capacitor, OS-CON
  13. Supercapacitor (Electric double-layer capacitor)
  14. Nanoionic supercapacitor
  15. Lithium-ion capacitor
  16. Mica capacitor
  17. Vacuum capacitor
  18. Variable capacitor – adjustable capacitance
  19. Tuning capacitor – variable capacitor for tuning a radio, oscillator, or tuned circuit
  20. Trim capacitor – small variable capacitor for seldom or rare adjustments of LC-circuits
  21. Vacuum variable capacitor
  22. Capacitors for special applications
  23. Power capacitor
  24. Safety capacitor
  25. Filter capacitor
  26. Light-emitting capacitor
  27. Motor capacitor
  28. Photoflash capacitor
  29. Reservoir capacitor
  30. Capacitor network (array)
  31. Varicap diode – AC capacitance varies according to the DC voltage applied
Learn More:   Why PT and CT Terminals are Star Connected

Also see: Types of Capacitors Based on Material Used

Magnetic (inductive) devices:

Electrical components that use magnetism in the storage and release of electrical charge through current:

  1. Inductor, coil, choke
  2. Variable inductor
  3. Saturable Inductor
  4. Transformer
  5. Magnetic amplifier (toroid)
  6. ferrite impedances, beads
  7. Motor / Generator
  8. Solenoid
  9. Loudspeaker and microphone

Also see:

Transducers, sensors, detectors

  1. Transducers generate physical effects when driven by an electrical signal, or vice versa.
  2. Sensors (detectors) are transducers that react to environmental conditions by changing their electrical properties or generating an electrical signal.
  3. The transducers listed here are single electronic components (as opposed to complete assemblies), and are passive (see Semiconductors and Tubes for active ones). Only the most common ones are listed here.
  4. Audio
  5. Loudspeaker – Electromagnetic or piezoelectric device to generate full audio
  6. Buzzer – Electromagnetic or piezoelectric sounder to generate tones
  7. Position, motion
  8. Linear variable differential transformer (LVDT) – Magnetic – detects linear position
  9. Rotary encoder, Shaft Encoder – Optical, magnetic, resistive or switches – detects absolute or relative angle or rotational speed
  10. Inclinometer – Capacitive – detects angle with respect to gravity
  11. Motion sensor, Vibration sensor
  12. Flow meter – detects flow in liquid or gas
  13. Force, torque
  14. Strain gauge – Piezoelectric or resistive – detects squeezing, stretching, twisting
  15. Accelerometer – Piezoelectric – detects acceleration, gravity
  16. Thermal
  17. Thermocouple, thermopile – Wires that generate a voltage proportional to delta temperature
  18. Thermistor – Resistor whose resistance changes with temperature, up PTC or down NTC
  19. Resistance Temperature Detector (RTD) – Wire whose resistance changes with temperature
  20. Bolometer – Device for measuring the power of incident electromagnetic radiation
  21. Thermal cutoff – Switch that is opened or closed when a set temperature is exceeded
  22. Magnetic field (see also Hall Effect in semiconductors)
  23. Magnetometer, Gauss meter
  24. Humidity
  25. Hygrometer
  26. Electromagnetic, light
  27. Photo resistor – Light dependent resistor (LDR)
Learn More:   What is Normally Open & What is Normally Closed [Video Included]

Networks

Components that use more than one type of passive component:

  1. RC network – forms an RC circuit, used in snubbers
  2. LC Network – forms an LC circuit, used in tunable transformers and RFI filters.

Content Credits: Wikipedia 

Creative Common License: https://simple.wikipedia.org/wiki/Wikipedia:Text_of_Creative_Commons_Attribution-ShareAlike_3.0_Unported_License

LEAVE A REPLY

Please enter your comment!
Please enter your name here